Elitech RC-5 Serie Bedienungsanleitung Seite 3

Overview
The RC-5 series are used to record the temperature/humidity of foods, medicines and other
goods during storage, transportation and in each stage of the cold chain including cooler bags,
cooling cabinets, medicine cabinets, refrigerators, laboratories, reefer containers and trucks.
RC-5 is a classic USB temperature data logger used in a wide range of applications around the
world. RC-5+ is an upgraded version that adds the functions, including automatic PDF reports
generation, repeat start without configuration, etc.
①
②
③
|| |
④
Specifications
Model
Temperature
Measurement
Range
Temperature
Accuracy
Resolution
Memory
Logging Interval
Data Interface
Start Mode
Stop Mode
Software
Report Format
Shelf Life
Certification
Protection Level
Dimensions
Weight
* At ultralow temperature, the LCD is slow but does not a ect normal logging. It will be back to
normal after the temperature rises.
** TXT for Windows ONLY
Operation
1. Battery Activation
(1) Turn the battery cover counterclockwise to open it.
(2) Gently press the battery to hold it in position, then pull out the battery insulator strip.
(3) Turn the battery cover clockwise and tighten it.
2. Install Software
Please download and install the free ElitechLog software (macOS and Windows) from Elitech
US: www.elitechus.com/pages/download or Elitech UK: www.elitecheu.com/pages/software or
Elitech BR: www.elitechbrasil.com.br.
3. Configure Parameters
First, connect the data logger to the computer via USB cable, wait until icon shows on the LCD;
then configure via:
ElitechLog Software:
- If you do not need to change the default parameters (in Appendix); please click Quick Reset
under Summary menu to synchronize local time before usage;
- If you need to change the parameters, please click the Parameter menu, enter your preferred
values, and click the Save Parameter button to complete the configuration.
Warning! For first time user or after battery replacement:
To avoid time or time zone errors, please make sure you click Quick Reset or Save Parameter
before usage to sync and configure your local time into the logger.
4. Start Logging
Press Button:
Press and hold the button for 5 seconds until the
LCD, indicating the logger starts logging.
Auto Start (RC-5+/TE only):
Immediate Start: The logger starts logging after removed from the
computer.
Timed Start: The logger starts counting after being removed from the
computer; it will start logging automatically after the set date/time.
Note: If the icon keeps flashing, it means the logger configured with start delay; it will start
logging after the set delay time elapses.
5. Mark Events(RC-5+/TE only)
Double click the right button to mark current temperature and time, up
to 10 groups of data. After marked, it will be indicated by Log X on the
LCD screen (X means the marked group).
6. Stop Logging
Press Button*: Press and hold the button for 5 seconds until the icon
shows on the LCD, indicating the logger stops logging.
Auto Stop: When the logging points reach the maximum memory
points, the logger will stop automatically.
Use Software: Open ElitechLog software, click Summary menu, and
Stop Logging button.
Note: *Default stop is via Press Button, if set as disabled, the button stop function will be
invalid; please open the ElitechLog software and click Stop Logging button to stop it.
7. Download Data
Connect the data logger to your computer
via USB cable, wait until the icon
on the LCD; then download via:
- ElitechLog Software: The logger will
auto-upload data to ElitechLog, then
please click Export to select your desired
file format to export. If data failed for
auto-upload, please manually click Download and then follow the export operation.
- Without ElitechLog Software (RC-5+/TE only): Simply find and open the removable storage
device ElitechLog, save the auto generated PDF report to your computer for viewing.
8. Reuse the Logger
To reuse a logger, please stopped it first; then connect it to your computer and use ElitechLog
software to save or export the data.
Next, reconfigure the logger by repeating the operations in 3. Configure Parameters*.
After finished, follow 4. Start Logging to restart the logger for new logging.
Warning! * To make space for new loggings, all previous logging data inside the logger will be
deleted after re-configuration.
If you forgot to save/export data, please try to locate the logger in the History menu of
ElitechLog software.
9. Repeat Start (RC-5+/TE only)
To restart the stopped logger, you may press and hold the left button to start logging quickly
without reconfiguration.
Please backup data before restart by repeating 7. Download Data - Download via ElitechLog
Software.
Status Indication
1. Buttons
Operations
Press and hold the left button for 5 seconds
Press and hold the right button for 5 seconds
Press and release the left button
Press and release the right button
Double click the right button
2. LCD Screen
① Battery Level
② Stopped
③ Logging
②③ Not started
④ Connected to PC
⑤ High Temperature Alarm
⑥ Low Temperature Alarm
3. LCD Interface
Temperature
Logging Points
Current Time
Battery Replacement
1 . Turn the battery cover counterclockwise to open it.
2. Install a new and wide-temperature CR2032 button battery into the battery compartment,
with its + side facing upward.
3. Turn the battery cover clockwise and tighten it.
What's Included
Data Logger
●
User Manual
●
Warning
Warning
Please store your logger at room temperature.
Please pull out the battery insulator strip in the battery compartment before using.
Please pull out the battery insulator strip in the battery compartment before using.
For first time user: please use ElitechLog software to synchronize and configure the system time.
Do not remove the battery from the logger while it's recording.
The LCD will be auto off after 15 seconds of inactivity (by default). Press the button again to
turn on the screen.
Any parameter configuration on ElitechLog software will delete all logged data inside the
logger. Please save data before you apply any new configurations.
Do not use the logger for long-distance transport if the battery icon is less than half as
Appendix
Default Parameters
Model
Logging Interval
Start Mode
Start Delay
Stop Mode
Repeat Start
Circular Logging
Time Zone
Temperature Unit
High Temperature Limit
Low Temperature Limit
Calibration Temperature
Temporary PDF
PDF Language
Sensor Type
RC-5
-30 。 C~+70 。 C (-22 。 F~158 。 F)*
±0.5 。 C/±0.9 。 F (-20 。 C~+40 。 C); ±1 。 C/±1.8 。 F (others)
0.1 。 C/ 。 F
Maximum 32.000 points
10 seconds to 24 hours
USB
Press button; Use software
Press button; Auto stop; Use software
ElitechLog, for macOS & Windows system
PDF/EXCEL/TXT** by
ElitechLog software
1 year
EN12830, CE, RoHS
IP67
80 x 33.5 x 14 mm
20g
shows
① ②
⑧
⑩
⑫
x 1
x 1
RC-5
15 minutes
Press Button
0
Use Software
Disable
。 C
60 。 C
-30 。 C
0°C
Internal
①
① USB Port
② LCD Screen
⑤
③ Left Button
RC-5+/TE
10 seconds to 12 hours
Press button; Auto start; Use software
Auto PDF report; PDF/EXCEL/TXT**
by ElitechLog software
icon shows on the
PDF
pdf
Function
Start logging
Stop logging
Check/Switch interfaces
Back to the main menu
Mark events (RC-5+/TE only)
③ ④ ⑤⑥ ⑦
⑦ Logging Points
⑧ No Alarm/Mark Success
⑨ Alarmed/Mark Failure
⑩ Month
⑪ Day
⑫ Maximum Value
⑬ Minimum Value
Current Date: M-D
Maximum Temperature:
Minimum Temperature:
Certificate of Verification
●
CR2032 button
●
RC-5+
2 minutes
Press Button
0
Press Button
Enable
Disable
UTC +00:00
。 C
/
/
0°C
Enable
Chinese/English
Internal
1
④ Right Button
⑤ Battery Cover
PDF
pdf
⑨
⑪
⑬
RC-5+TE
2 minutes
Press Button
0
Press Button
Enable
Disable
UTC +00:00
。 C
/
/
0°C
Enable
Chinese/English
External
| | |
||
x 1
x 1
.