ENGLISH
1. Slide the included mounting clip over the rear of
the VideoMic Me-C+ so that the gap in the clip
lines up with the USB-C connector
Note: We recommend using the clip whenever
suitable, to provide additional support and
security, but certain protective cases may not be
compatible with the clip
2. Connect the microphone to your phone or tablet
and adjust the mounting clip until secure
Note: May not be compatible with older
operating systems, be sure to update your
device to the latest operating system.
3. To reduce the impact of wind noise and plosives,
slide the included windshield over the front of
the microphone
4. To monitor your audio, connect headphones to
the 3.5mm output on the rear of the microphone
5. Download the RØDE Reporter app to record
audio and update firmware
GERMAN
1. Schieben Sie den mitgelieferten Montageclip
über die Rückseite des VideoMic Me-C+, sodass
die Lücke im Clip mit dem USB-C-Anschluss
übereinstimmt
Hinweis: Wir empfehlen, den Clip immer
dann zu verwenden, wenn es möglich ist, um
zusätzliche Unterstützung und Sicherheit zu
bieten, aber bestimmte Schutzhüllen sind
möglicherweise nicht mit dem Clip kompatibel
2. Schließen Sie das Mikrofon an Ihr Telefon oder
Tablet an und justieren Sie den Montageclip, bis
er sicher sitzt
Hinweis: Möglicherweise nicht kompatibel mit
älteren Betriebssystemen, stellen Sie sicher, dass
Ihr Gerät auf dem neuesten Betriebssystem läuft.
3. Um den Einfluss von Windgeräuschen und
Plosivlauten zu reduzieren, schieben Sie den
mitgelieferten Windschutz über die Vorderseite
des Mikrofons
4. Um Ihren Ton zu überwachen, schließen Sie
Kopfhörer an den 3,5-mm-Ausgang auf der
Rückseite des Mikrofons an
5. Laden Sie die RØDE Reporter App herunter,
um Audio aufzunehmen und die Firmware zu
aktualisieren
FRENCH
1. Faites glisser le clip de montage inclus sur
l'arrière du VideoMic Me-C+ afin que l'espace
dans le clip soit aligné avec le connecteur USB-C
Remarque : Nous recommandons d'utiliser le
clip chaque fois que possible, pour fournir un
support et une sécurité supplémentaires, mais
certains étuis de protection peuvent ne pas être
compatibles avec le clip