Werbung
NO
PROBLEM
Power cleaner will not turn on
No water comes out nozzle
The self-priming is not working
well and the tool does not
sound correct
Can not get 2X power mode
shift by double clicking the
power trigger
1. Tool, accessories and packaging should be sorted for environment-friendly recycling.
2. Power tools and accessories at the end of their service life still contain large amounts of valuable
raw materials and plastics which can likewise be fed back into a recycling process.
3. Some dust created by working contains harmful chemicals must be collected by special garbage
re- cycle site.
4. On Waste Electric and Electronic Equipment and Batteries and Accumulators and Waste
Batteries and Accumulators and their implementation in accordance with national laws, electric
equipment and batteries and battery pack(s) that have reached the end of their life must be
collected separately and returned to an environmentally compatible recycling facility.
SERVICE
1. In case of warranty, repair or the purchase of spare parts, always contact an authorized service
center. Attach the service card and the invoice.
2. The warranty does not cover normal wear, overloading or abnormal use of the product.
ACCESSORIES
CARE AND MAINTENANCE
Check the battery volume by pushing the button beside the power
indicator light. Check the safety lock above your thumb to make
sure is pushed in.
Make sure when you pull the power trigger, your hand is squeezing
the water trigger at same time. A full self-priming process from
empty hose will take 30 seconds under max mode. If the water
inlet hose is connected with tap water it'll shorten the time.
Make sure the Garden Hose Adaptor is tightly connected with the
screen inside. Push the connectors on both ends of the hose to
are connected tightly.
suction height from water source. Remove hose kinks. Clean the
Make sure the double click of the power trigger in 0.8 seconds.
ENVIRONMENT PROTECTION
CORRECTIVE ACTION
23
Werbung
