WATER SUPPLY CONNECTION
Attach the water suction hose kit (F) to the
hose kit (F).
Note: Flush out garden hose before
connecting to garden hose adapter.
The power cleaner can run on water from a
water tank or other sources. Always intake
clean water only. Always use the water
on a regular basis (FIG.5).
The power cleaner can also run on water
from faucet. The adaptor (M) to garden
hose is included in the box (FIG.6).
adapter and faucet to prevent damages to
the power cleaner.
You have now completed the assembly and
are ready to begin using your power
cleaner.
Read and observe all safety instructions.
ASSEMBLY INSTRUCTIONS
FOAM CANNON INSTALLATION
The foam cannon comes with a straw which
see the straw, look inside the foam cannon
and attach it to the high pressure top. When
formulated detergent or cleaner with a
water ratio according to instructions on the
container.
• DO NOT use thick or gel-like detergents
as they will clog the foam cannon and can
cause damage.
Attach Foam Cannon (D) into end of
lance(B) by pressing cannon into place.
place.
Note: Always lock triggers when changing
the foam cannon to ensure it does not eject
with force.
properly formulated detergent or cleaner
with water ratio according to instructions on
the container.
17