NEC NP1000 Bedienungshandbuch Seite 104

Using Software Keyboard to enter an encryption key
1. Select one of [Key 1], [Key 2], [Key 3] and [Key 4] and press the ENTER button.
The software keyboard will be displayed.
2. Use the SELECT
3. After finishing entering the WEP key, use the SELECT
ENTER button.
The software keyboard will disappear.
[Domain]
Host Name ............ Type in a hostname. Up to 60 alphanumeric characters can be used.
Domain Name ....... Type in domain name of the network connected to the projector. Up to 60 alphanumeric characters can be
used.
button to select one key and press the ENTER button.
94
6. Using On-Screen Menu
button to select [OK] and press the