Menu Descriptions & Functions [Source]; Computer 1 And 2; Computer 3 (Rgb Digital); Component - NEC NP1000 Bedienungshandbuch

6. Using On-Screen Menu
¿ Menu Descriptions & Functions [Source]

Computer 1 and 2

Selects the computer connected to your COMPUTER 1 or COMPUTER 2 input connector signal.
NOTE: An optional component cable (Component V or ADP-CV1 cable) is needed for a component signal.

Computer 3 (RGB Digital)

Selects the computer connected to your COMPUTER 3 (DVI-D) connector.

Component

Selects what is connected to your COMPONENT IN (Y, Cb/Pb, Cr/Pr).

Video

Selects what is connected to your VIDEO input-VCR, laser disc player, DVD player or document camera.

S-Video

Selects what is connected to your S-VIDEO input-VCR, DVD player, or laser disc player.
NOTE: A frame may freeze for a brief period of time when a video is played back in fast-forward or fast-rewind with a Video or S-
Video source.

Viewer

This feature enables you to make presentations using a PC card that contains captured images and slides created
with the exclusive Ulead Photo Explorer 8.0 for NEC contained on the CD-ROM. See the supplied NEC Wired and
Wireless Network Setup Guide for installing the Ulead Photo Explorer 8.0 for NEC.
See page 60 for viewing slides.

LAN

Selects a signal from the LAN port (RJ-45) or the NEC optional wireless LAN card plugged into the projector's card
slot.
69