RENPHO R-D200R Benutzerhandbuch Seite 10

: Press to cycle through A1/A2/A3 modes.
A1 Vibration only. Speed increases from 1 to 20 and
decreases 20 to 1 (in cycle).
A2 Vibration and Rotation. Speed increases from 1 to
20 and decreases from 20 to 1 (in cycle).
A3 Vibration always on, Rotation on at 1-minute
inte vals. Speed will un in the cycle of 1 15 10 15
10 15 10 15 1.
: Press to cycle through 10 / 15 Default)/ 20-minute
auto-off time. The timer will resta t each time you press the
button.
Note:
1. Each press is accompanied by a beep sound and
desc iption of the setting will show on the screen.
2. The speed can be adjusted only when the Program mode is
on. If you press the Speed "+" or Speed "-" button when the
Auto mode is on, the machine will switch to Program P1 and
Speed 5 by default.
3. Du ing the massage, the timer will not resta t unless the
Time button is pressed.
4. The machine is programmed with a memo y function. It will
recall the last setting used once the Power button is tu ned
on again. The memo y function will not work if the power
supply is unexpectedly cut off.
5. It is recommended to enjoy the massage for no more than
30 minutes at a time.
EN DE FR IT ES
07