Herunterladen Diese Seite drucken

Reolink Argus 4 Pro Bedienungsanleitung Seite 7

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 11
Safety Instructions of Battery Usage
Argus 4 Pro is not designed for running 24/7 at full capacity or around-the-clock live streaming.
It's designed to record motion events and to live view remotely only when you need it. Learn useful
tips on how to extend the battery life in this post:
https://support.reolink.com/hc/en-us/articles/360006991893
1. The battery is built-in, so do not remove it from the camera.
2. Charge the rechargeable battery with a standard and high-quality DC 5V battery charger or Re-
olink solar panel. Do not charge the battery with solar panels from any other brands.
3. Charge the battery when temperatures are between 0°C and 45°C and always use the battery
when temperatures are between-10°C~+55°C.
4. Keep the USB charging port dry, clean and free of any debris and cover the USB charging port
with the rubber plug when the battery is fully charged.
5. Do not charge, use or store the battery near any ignition sources, such as fire or heaters.
6. Do not use the battery if it gives off an odor, generates heat, becomes discolored or deformed,
or appears abnormal in any ways. If the battery is being used or charged, turn off the power
switch or remove the charger immediately, and stop using it.
7. Always follow the local waste and recycle laws when you get rid of the used battery.
11
English
Troubleshooting
Camera
is not
Powering on
If your camera is not turning on, please apply the following solutions:
Charge the battery with a DC 5V/2A power adapter. When the green light is on, the battery is
fully charged.
If the problem is not solved, please contact Reolink Support.
Failed to Connect to Wi-Fi During Initial Setup Process
If the camera fails to connect to Wi-Fi, please try the following solutions:
• Ensure that you have entered the correct Wi-Fi password.
• Put the camera closer to your router to ensure a strong Wi-Fi signal.
• Change the encryption method of the Wi-Fi network to WPA2-PSK/WPA-PSK (safer encryption)
on your router interface.
• Change your Wi-Fi SSID or password and make sure that SSID is within 31 characters and
password is within 64 characters.
• Set your password using only the characters available on the keyboard.
If the problem is not solved, please contact Reolink Support.
English
12

Werbung

loading

Diese Anleitung auch für:

B740x