Safety instructions
Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic compatibility
regulations and limits in accordance with the EMC Directive 2014/30/EU.
– Local operating restrictions – for example, in hospitals, aircraft, petrol
stations or in the vicinity of people with pacemakers – may apply.
Electronic devices can potentially cause hazards or interference or be
subject to hazards or interference.
Danger – powerful magnetic fields
Powerful magnetic fields can adversely affect persons with active medical
implants (e.g. pacemaker) as well as electromechanical devices (e.g.
magnetic cards, mechanical clocks, precision mechanics, hard disks).
With regard to the effect of powerful magnetic fields on persons, the
applicable national stipulations and regulations must be complied with
such as BGV B11 §14 „electromagnetic fields" (occupational health and
safety - electromagnetic fields) in the Federal Republic of Germany.
To avoid interference/disruption, always keep the implant or device a safe
distance of at least 30 cm away from the magnet.
1
10
9
6
1 ON/OFF switch
2 Vertical vial
3 Horizontal vial
4 Battery compartment
5 Levelling foot adjustment
1
Inserting and removing the batteries
Open the battery compartment on the rear of the housing and insert
2 x 1.5V LR03 (AAA). Correct polarity must be observed. Replace the
battery compartment cover. The device can now be switched on.
The device must be switched off before removing
2
3
7
8
6 Levelling foot
7 Spring-clamp holder
8 Magnets (bottom)
9 Laser output windows
10 LED laser indicator
the batteries.
HandyLaser
4 5
6
07
EN