Completely read through the operating instructions,
the „Warranty and Additional Information" booklet as well
!
as the latest information under the internet link at the end
of these instructions. Follow the instructions they contain.
These documents must be kept in a safe place and passed
on together with the product.
Intended use
This laser spirit level is designed for aligning horizontal surfaces and
slopes The measuring device has a point laser. The spring clips make
the measuring device particularly suitable for laying tiles.
General safety instructions
– The device must only be used in accordance with its intended
purpose and within the scope of the specifications.
– The measuring tools and accessories are not toys.
Keep out of reach of children.
– Modifications or changes to the device are not permitted, this
will otherwise invalidate the approval and safety specifications.
– Do not expose the device to mechanical stress, extreme
temperatures, moisture or significant vibration.
– The device must no longer be used if one or more of its functions fail,
the battery charge is weak, or the housing has been damaged.
– Note local and national safety instructions to ensure proper use
of the device.
Safety instructions
Using class 2 lasers
IEC 60825-1:2014, EN 60825-1:2014/A11:2021
EN 50689-1:2021
– Attention: Do not look into the direct or reflected beam.
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser radiation, they should shut
their eyes and immediately move away from the beam.
– Under no circumstances should optical instruments (magnifying glass,
microscope, binoculars) be used to look at the laser beam or reflections.
– Do not use the laser at eye level (1.40 ... 1.90 m)
– Reflective, specular or shiny surfaces must be covered whilst laser devices
are in operation.
– In public areas shield off the laser beam with barriers and partitions
wherever possible and identify the laser area with warning signs.
06
EN
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 650 nm