MA lighting nPC command wing Schnellstartanleitung Seite 25

Data
Data
Current:
Current:
Power cable:
Power cable:
Required plug connector:
Required plug connector:
Power input:
Power input:
90 – 264 V ~ 50 / 60 Hz (USA, Canada
Automatic operation, no switching necessary!
120 V ~ ,60 Hz (USA, Canada)
Caution: Use the indentical electric circuit, repsectively the identical
Automatic operation, no switching necessary!
protective earth potential for PC (onPC) and grand MA onPD
command wing, otherwise damages of hardware and / or
Caution: Use the indentical electric circuit, repsectively the identical
malfunction can result from connecting via the USB cable. That
protective earth potential for PC (onPC) and grand MA onPD
means, both units (PC and grandMA2 onPC command wing) must
command wing, otherwise damages of hardware and / or
be connected to the same power socket or (if guaranteed) to the
malfunction can result from connecting via the USB cable. That
same electric circuit (portective earth and potential identical)!
means, both units (PC and grandMA2 onPC command wing) must
be connected to the same power socket or (if guaranteed) to the
same electric circuit (portective earth and potential identical)!
Only adequately protected cables may be used ( min. Ø = 3 x
1,0mm²). Cable and socket are not included in delivery.
Only adequately protected cables may be used ( min. Ø = 3 x
1,0mm²). Cable and socket are not included in delivery.
Must meet the standard in the respective country. The plug
connector is not included in delivery.
Must meet the standard in the respective country. The plug
The socket should be serviced by qualified personnel only!
connector is not included in delivery.
approx. 40 VA
The socket should be serviced by qualified personnel only!
max. 40 VA
– 230 V ~ ,50 Hz
MA onPC
command wing
MA onPC
command wing
Data
Data
Transport
Transport
Safety
instructions
Safety
Safety and
instructions
environmet
Safety and
Quickstart
environmet
Connect
Quickstart
Quickstart
Connect
ON / OFF
Quickstart
Maintenance
ON / OFF
Maintenance
Conformity
Conformity
23