To Clean The Product; Technical Data - Meec Tools 024251 Bedienungsanleitung

5 Storage
● If the product is not to be used for a long time, store the
product in its original package.
● Store the product in a dry and well ventilated area out of
direct sunlight. The the storage temperature range is
0°C–50°C.
● Store the product out of the reach of children.
6 Maintenance
Warning! If you do not obey these instructions, there
is a risk of death or injury
Warning! The product must be disconnected from the
power outlet before any maintenance is done to it.
● Do not open the product The product has no internal
parts that the user can service or repair.
● The product must be repaired by an authorized service
center.
7 Troubleshooting
Problem
The LED indicators does not light up
when the battery is charging.
8 Disposal
8.1 To discard the product
● Make sure that you follow local regulations when you
discard the product. Do not burn the product.
9

Technical data

Specification
Rated voltage
Power
Rated output current
Cable length
Possible cause
The power plug is not correctly
connected to the power outlet.
The battery is not correctly attached to
the product.
Value
230V
130W
4.5A
1.8 m
● Remove the battery from the product before it is to be
cleaned or maintenance is done to it.
● Regularly check all fasteners, screws and bolts. Tighten
any loose screws immediately.
6.1

To clean the product

Warning! The product must be disconnected from the
power outlet before any maintenance is done to it.
Caution! Do not insert sharp objects to clean the
charging contacts.
● Do not use solvents, corrosive or abrasive detergents to
clean the product.
● If needed, clean the product with a dry or damp cloth.
● Clean the charging contacts from dust and dirt after each
use.
● If needed, remove contamination in areas that are hard to
access with compressed air (max 3. bar).
Make sure the power plug is
correctly connected to the power
outlet.
Make sure the battery has clicked in
place in the charging cavity.
Action
15