Silvercrest RHYTHM Bedienungs- Und Sicherheitshinweise Seite 19

For IOS device, please complete the Siri setup before activate with
this voice control function on headphone. For Android device,
please open the Google assistant function and then follow its in-
structions to complete setting before using voice control function
on headphone.
NOTE: Google Assistant is available on Android 5.0 or above
devices.
2. Activate the Bluetooth function and connect this headphones
®
with your mobile device.
3. After connecting the headphones with your mobile device, briefly
press Multi Function Button
function.
4. Now you can use the voice control function.
Putting on the headphones
The headphones can be adjusted to your head size, if necessary:
The speakers with earpads
2
purpose. Adjust these to ensure optimal comfort. Please follow the
marking "L" (= left) and "R" (= right).
Headphones button functions
for music playback
Start a playlist on your playback device and set the volume to
minimum first. After putting the headphones on select a pleasant
volume. You can adjust the headphones volume with volume
control button or . Music is played back through the
5 7
speakers with earpads
2
This headphone contains total 5 buttons. These control the
following functions (on "R" side of headphones):
Function Action
– Press once to increase the volume.
– Press and hold for 2 seconds for next track.
– One signal tones will sound when the maximum
volume has been reached.
– Press once to reduce the volume.
– Press and hold for 2 seconds for previous track.
– One signal tone will sound when the minimum
volume has been reached.
– In paired mode, press and hold for approx.
2 seconds to change to pairing mode to allow
another communication device for connection.
twice to activate the voice control
6
are secured to the band for this
1
.
Function Action
– Press and hold approx. 2 seconds to turn the
product ON.
– Press once again and hold approx. 5 seconds to
turn the product OFF.
– Press once to play/stop music playback.
– Press once to switch ANC ON.
– Press once again to switch ANC OFF.
Headphones button functions
as a hands-free device
You may also use the headphones for telephone calls when used
with a communication device which supports this function. If your
communication device supports the Bluetooth
will be able to use the following functions:
Function
Answer/end call
Ignore call
Increase volume
Reduce volume
End the current call and
answer call waiting*
Switch between two calls
(toggle)*
* These functions must be supported by your mobile service
provider.
– The ringer and the caller's voice are rendered through the
speakers with earpads
2
– Music playback is automatically paused when a call is received.
– The microphone records your voice.
12
– Music continues after the call has been ended.
standard 5.3, you
®
Action
Press once the MFB .
6
Press and hold the approx.
6
2 seconds.
Press Volume button 5
(one signal tone will sound when the
maximum volume has been reached).
Press downward Volume button
(one signal tone will sound when the
minimum volume has been reached).
Press click the MFB .
6
Press and hold the MFB
approx. 2 seconds until it beeps.
.
GB/IE
7
6
19