Herunterladen Inhalt Inhalt Diese Seite drucken

reer BeeConnect Gebrauchsanleitung Seite 25

Digitales babyphone
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
Problem
Possible cause
• The baby/parent unit is close to interfering
Signal noise/
devices (e.g. microwave) or metal objects.
Connection inter-
rupted
• The maximum range has been exceeded.
• Batteries in the baby/parent unit are too
depleted.
• The parent unit receives sounds. Depending
LED 2 - 4 light up red
on the noise level, one or several LED light up.
• ECO mode is activated
LED 5 lights up green
• The microphone sensitivity is set too high.
Baby unit reacts upon
noises that are too
quiet
Baby unit only reacts
• The microphone sensitivity is set too low.
upon noises that are
loud
• Baby monitor is in ECO mode.
Parent unit does not
emit a signal tone
when the maximum
range is exceeded
Troubleshooting
Action
• Try to find the source of interference and move the
units to a different position.
• Reduce the distance between the baby unit and the
parent unit.
• Replace/charge the batteries and/or connect the
unit to the power supply.
• If necessary, turn up the volume to make sure that
you hear the sounds from your baby.
• No action required.
• Switch the microphone sensitivity to "LOW".
• Switch the microphone sensitivity to "HI".
• In order to activate the range control, push the
switch on the baby unit to "range alarm".
GB
25

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

50110

Inhaltsverzeichnis