shock.
6. Do not expose the product or its accessories to damp or extremely high or low
temperatures.
7. Do not leave packing materials unattended.They may become dangerous
playing material for children.
8. Dropping,falling,pressure or tensile forces could destroy or at least limit the
function of the product.
9. Never position the device in the vicinity of combustible or easily inflammable
materials.
10. Always make sure that the rotary table on which the object is placed is
located in the center of the housing!
11. The device should continue to run for approximately 2 minutes after each
application,which ensures the self-cleaning of the device!
12. To prevent health damage,never use poisonous ,flammable or explosive
paints or materials!
13. Always ensure proper ventilation!
14. To not impair the extraction performance, you may not extend the extraction
pipe!
15. In commercial institutions,the accident prevention regulations of the
employer's liability insurance association for electrical systems and operating
facilities are to be observed.
16. Always turn the device off and pull the mains plug out when the device is not
in use!
17. If the filter is contaminated with substantial amounts of paint,it can no longer
work efficiently and must be replaced with a clean filter.
18. Avoid sharp points, blades, and other items to scratch the product.
19.
Do not place hot appliances near the walls,
Keep away from fire sources.
roof or curtains.
20. The air inside the tent is scarce, so good ventilation must be ensured when
painting inside the tent.
21. Due to the large size of this product, installation requires 2 to 4 people to
assist.
22. Please roll out the booth slowly and make sure the PVC transparent
window is intact before inflating.
3