Modster Arrows hobby Twin 64mm Mikoyan MiG-29 Bedienungsanleitung Seite 17

Control horn and servo arm settings
1. The table shows the factory
control horns and servo arms. Fly the aircraft at the
factory settings before making changes.
2. After flying, you may choose to adjust the linkage
positions for the desired control response.
Finding the center of gravity
Finding the correct center of gravity is critical in ensuring that the aircraft
performs in a stable and responsive
distribution so the aircraft balances in the range stated on the diagram.
• Depending on the capacity and weight of your choosen flight
batteries, move the battery forward or backward to adjust the
center of gravity.
• If you cannot obtain the recommended
suitable location, you can also install a counterweight
CG. However, with the recommended
required. We recommend flying without unnecessary
Before flying the model
Find a suitable flying site
Find a flying site clear of buildings, trees, power lines and other obstructions.
required and have mastered flying your plane in confined spaces, choose a site which is at least the size of two to three
football fields - a flying field specifically
wander unpredictably
Performing a range check
A radio range check should be performed prior to the first flight of the day. This test may assist you in detecting electronic
problems that may lead to a loss of control- problems such as low transmitter
ponents or radio interference. This usually requires an assistant and should be done at the flying site
o
settings for the
Q)
manner. Please adjust the weight
CG by moving the battery to a
to achieve correct
battery size, a counterweight
counterweight.
for RIC planes is best
Horns Arms
(5
(5
(5
is not
Until you know how much area will be
Never fly near people - especially
batteries, defective or damaged radio com-
More control throw
(5
Less control throw
85mm-95mm
l"iiiiiiiii•• l iiiiiijjjli
children, who can