Modster Arrows hobby Twin 64mm Mikoyan MiG-29 Bedienungsanleitung Seite 13

Model assembly
Installation of the vertical
1 . Connect the rudder servo
Sion located in the aft fuselage. Apply glue to the
illustrated location and adhere
the fuselage as shown.
3.Use the included screws
stabilizers
Pushrod connection
1-With the servo at its neutral position, connect the
pushrod to the control arms as shown
and horizontal stabilizers
leads to the servo exten
the vertical stabilizer
Required Adhesives:
Medium CA
to secure the horizontal
HKM3.O*10mm
2.Slide the horizontal stabilizer spar into the fuselage.
to