Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Start-up
5 Start-up
First install the Homematic IP app
on your smartphone and set up your
Homematic IP Access Point – basic
as described in the following section.
Once your device has been set up suc-
cessfully, you can add and integrate
new Homematic IP devices to your
system.
5.1
System requirements
Router
A WLAN router (2.4 GHz) with network
and Internet connection is required for
setup and configuration of the devices.
Smartphone app
Setup and operation are flexible and
intuitive via smartphone using the
Homematic IP cloud in combination
with the free Homematic IP app.
WLAN
2,4 GHz
iOS
Figure 2
Android
5.2
Set-up and Transmission of
WLAN access data
Please read this entire section
before starting to configure the
WLAN access data.
During and after installation, keep
a minimum distance of 1 m to
your router.
Make sure that the scratch field on
the back of the device has not
been damaged before first use
and that the QR code or text
below it is not completely visible.
If the scratch field has been da-
maged, please contact your speci-
alist retailer.
For installation of the Homematic IP
Access Point – basic you will need the
free Homematic IP app for Android
and iOS. Download the app in the res-
pective app store and install it on your
smartphone.
For transmission of the WLAN access
data the Homematic IP Access Point –
basic provides its own WLAN network,
to which the smartphone must be con-
nected in order to transmit the access
16
Werbung
