Werbung
Verfügbare Sprachen
Verfügbare Sprachen
| TROUBLESHOOTING
PROBLEM
The GN remote control
doesn't control the HP-10
HP-10 is not working
With EXTREME care use ONLY water or detergents for delicate surfaces with a very soft
cloth to sweep dust and remove stains.
Any acid or not extremely soft cloth will irreversibly damage the unit. Do not use alcohol.
CAUSE
|
| The GN remote control
can be used to control
more than one unit. To
control each unit the
correct mode must be
selected on the remote.
|
The interconnect cables
used on the input/output
are not shielded.
|
The power cord is not
plugged in.
|
The cables are not
connected properly.
|
The IEC fuse is blown
CLEANING THE UNIT
21
SOLUTION
|
Press the "AMP" button
on the remote.
|
If you have another Gold
Note amplifier in your
system, pess the "AMP"
+ SHIFT" button on the
remote.
|
Always use shielded
cables.
|
Connect the power cord
properly and ensure the
power outlet is working.
|
Ensure that the cables are
properly connected.
|
Replace it with one of the
same value.
EN
EN
DE
DE
IT
IT
FR
FR
Werbung
