Werbung
Verfügbare Sprachen
Verfügbare Sprachen
| FEATURES AND DISPLAY
VOLUME AND MUTE CONTROL
To adjust the volume using the VOL + and
VOL- buttons on the remote or rotate the
SKC.
To mute or un-mute the audio input, press
once the audio icon
When MUTE mode is active, a red X appears
on the audio icon.
COMPLETE CONTROL
The HP-10 can controlled with the included
remote control, the touchscreen display and
the rotary knob to offer the best possible
experience. With the remote control you
can adjust every setting while listening to
your headphones comfortably seated in your
favourite spot.
The HP-10 features a trigger IN/OUT
connection to let you switch on the rest of
your system in synch with the headphone
amplifier.
Remote control:
to control the HP-10 by the
remote control,
press the AMP mode button
and then the POWER button on the remote
control. After enter in the OPTION menu and
choose AMP item.
If there is another Gold Note amplifier in
your system, you can control the HP-10
simply press the combo "AMP + SHIFT"
buttons on the remote control and then
select SHIFT AMP on the OPTION menu
(read more at the page 17).
on the display.
15
BYPASS
In a system made up of several elements
including a preamp, the bypass function of
the HP-10 allows you to leave the wiring
of the system unchanged and use either
the HP-10 or the preamp for loudspeakers
listening.
The Bypass function is automatically
activated by selecting one of the 4
headphone outputs (not the REAR output)
on the HP-10 and then putting the unit
into standby mode (red led) by pressing
and holding down the SKC or display for 3
seconds or pressing the power button on the
remote control.
PLEASE NOTE: for the bypass to work
correctly, it is necessary that the source and
the preamp connected to the HP-10 use the
same type of wiring (RCA/XLR).
EN
EN
DE
DE
IT
IT
FR
FR
Werbung
