Werbung
Verfügbare Sprachen
Verfügbare Sprachen
| SETTINGS
Press the SKC once to enter the settings
menu then turn the SKC to navigate the
menu. Choose an item and press SKC once
to enter in the dedicated section.
You can also navigate the menu via the
touchscreen display or by using the IN+ and
IN- buttons on the remote control.
Touch the choosen item once or press the
Enter button on the remote control to enter
the chosen menu.
INFORMATION
Select this item to view the device
information, such as:
|
Model
|
Serial number (S/N)
|
Firmware version (FW VERSION)
To exit the menu press or tap on
OPTIONS
Select this menu for setting BRIGHTNESS,
REMOTE SELECTION and the AUTO OFF.
Press once on the brightness icons to choose
and apply the desired brightness between
high, low and OFF.
When the display is set to OFF, use the SKC
or press on the display to activate it again.
To exit the menu press or tap on
AUTO OFF
The HP-10's various functions also include
AUTO OFF, which allows you to set a timer
to switch off the unit after 4 - 8 hours if no
action is performed while listening.
REMOTE SELECTION
To control HP-10 set the AMP item. If there
are another Gold Note amplifier in the same
system, set SHIFT AMP.
FACTORY RESET
Click the function ONLY IF YOU WANT to
reset the unit to factory settings.
When FACTORY RESET is selected, the
following warning message appears.
Press OK to confirm or
17
EN
EN
DE
DE
IT
IT
FR
FR
to decline.
Werbung
