cecotec CONGA 2000 CARPET&SPOT CLEAN COMPACT Bedienungsanleitung Seite 48

ENGLISH
When pressing the
water release button,
there is no water or
little water released
It does not vacuum,
or it is too weak
7. TECHNICAL SPECIFICATIONS
Product reference: EU01_100073
Product: Conga 2000 Carpet&Spot Clean Compact
Voltage: 220-240 V, 50/60 Hz
Power: 330 W
IPX4
Actual waste-water tank capacity: around 0.5 litres
Actual clean-water tank capacity: around 0.8 litres.
Technical specifications may change without prior notification to improve product quality.
Made in China | Designed in Spain
8. DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES
48
CONGA 2000 CARPET&SPOT CLEAN COMPACT
The nozzle is clogged.
The bracket or pump are damaged.
The power switch is in the off
position.
The waste-water tank is full,
which activates the buoy.
The hose does not work properly.
The waste-water tank is not
correctly installed.
The air inlet sponge is blocked.
This symbol indicates that, according to the applicable regulations, the
product and/or batteries must be disposed of separately from household
waste. When this product reaches the end of its shelf life, you should dispose
of the cells/batteries/accumulators and take them to a collection point
designated by the local authorities.
Remove the suction nozzle
and clean it with clean
water.
Contact the official Cecotec
Technical Support Service.
Turn on the power switch.
Empty the waste-water tank
and use it again.
Check that the hose is not
cracked, broken or clogged.
Install the waste-water tank
correctly.
Clean or replace the sponge.