Record; Record With The Built-In Microphone - Philips LFH 660 Benutzerhandbuch

5

Record

5.1

Record with the built-in microphone

Press the button
1
INDEX / a
select the desired folder
A
Press the button to start recording. The record/play
2 2
g
indicator lights red . Point the built-in microphone toward the
B
sound source.
To pause recording, press the
3
indicator will blink , and
B
Press the button again to resume recording.
g
To stop recording, press the
4
1
10
while the recorder is stopped to
1
.
button . The record/play
2
g
will flash on the display
PAUSE
button .
3
j / DEL
B
2
A
3
D Notes
• Set the desired voice activation function and recording mode before
starting recording (see Customize settings on page 16 for details).
• Make a test recording to make sure that the Voice Tracer settings
are correct.
• Press and hold f during recording to display the remaining
recording time.
• Press during recording to create a new file.
b
. • The maximum number of files in each folder is 99, for a total capacity
C
of 396 files (99 files x 4 folders).
• If the recording time exceeds the available capacity or the number of
files reaches 396, recording stops and 'FULL' will be displayed. Delete
a few recordings or move them to a computer.
• Do not remove the batteries during recording. This may cause the
recorder to malfunction.
• If recording for a prolonged period of time, replace the batteries
before beginning.
• The Voice Tracer can record while powered through a USB cable
without draining the battery. Connect the recorder to a computer
C
using the USB cable and press the
to start recording (LFH860/870/880 only).
button for 1 second or longer
g
User manual