Stop All Screen; Feeder Screen; History Screen - Roxell Rdc Gebrauchsanleitung

10.0 Stop All Screen

To clear all batches already put in the queue for feed, press on Stop All shortcut key. The
Stop All screen shows the total sum of all batches currently done or in queue. To stop all
enter 0 (Prog then „0‟ then Enter

11.0 Feeder screen

Press on the Feeder shortcut key to enter the feeder setup screens.
The RDC operates a feeder. Up to 8 on and off times can be setup. Use the forward
and back keys to scroll through the 8 different setup times.

The feeder will not operate on a fast day.

12.0 History screen

Press on the History shortcut key to enter the feed history screens.
The RDC stores up to 7 days of history.
This screen displays the total amount of feed given today to the females.
Use the forward key to scroll through the history for all 6 male hoppers.
In these 6 screens are shown the amount of feed given today to each male hopper.
Following the last male hopper history screen is today's total amount for all the male
hoppers.
Roxell Daybin Controller – RDC
To Give: 0 Kg
Prog  0  Enter
).
Feeder On 08:00
Time 1 Off 10:00
Females Today
Given: 250 Kg
Males –H1
Today
Given: 80Kg
All males Today
Given: 480 Kg
Page 21 of 193