3.3. Pleuel und Zylinder
Demontage/Montage
Die Zerlegung der Kompressorbaugruppe ist in obiger
Zeichnung dargestellt.
Hauptreparaturen:
Zylinderoberteil (2) auswechseln: Kap. 3.4
Ventile (3) wechseln: Kap. 3.4
Pleuel (4) wechseln: Kap. 3.5
Topfmanschette (5) wechseln: Kap. 3.5
Bei Wiederzusammenbau wird der Zylinder (1)
zusammengesetzt und vorsichtig über die Manschette (5)
geschoben und verschraubt.
Das Pleuel muss sich ohne zu klemmen bewegen können
(durch Drehen am Lüfterrad überprüfen).
© PARI GmbH Spezialisten für effektive Inhalation 085D0065-A-07/09
3.3. Piston and cylinder
Disassembly/Assembly
Disassembly or assembly of the compressor is shown in the
drawing above.
Main repairs:
Change cylinder upper part (2):
Change valves (3):
chap. 3.4
Change piston (4):
Change piston seal (5):
Put the assembling of the cylinder (1) carefully onto the piston
seal (5) and screw it.
Take care that the piston is movable without sticking (check
by rotating the fan).
chap. 3.4
chap. 3.5
chap. 3.5
6