WARNING
Please observe the following information before using the in-
strument:
Do not operate the instrument in the proximity of electrical weld-
|
ers, induction heaters and other electromagnetic fields.
After an abrupt temperature fluctuation, the instrument should
|
be allowed to adjust to the new temperature for about 30
minutes before using it. This helps to stabilize the IR sensor.
Do not expose the instrument to high temperatures for a long
|
period of time.
Avoid dusty and humid surroundings.
|
Measurement instruments and their accessories are not toys.
|
Children should never be allowed access to them!
In industrial institutions, you must follow the accident prevention
|
regulations for electrical facilities and equipment, as established
by your employer's liability insurance organization.
Please observe the following five safety rules:
1
2
3
4
5
®
Testboy
15
Disconnect.
Ensure that the instrument cannot be turned back
on again.
Ensure isolation from the main supply voltage
(check that there is no voltage on both poles).
Earth and short-circuit.
Cover neighbouring parts that are under live electri-
cal load.
Notes
11