Litecraft CPiX.4 Bedienungsanleitung Seite 19

• Cluster Mounting WITHOUT extra accessories
Multiple CPiX.4 can be mounted among themselves without
extra accessories. (see figure). EVERY CPiX.4 has to be mount­
ed by the use of one of the two backsite mounted yokes.
Only use one of the two backside mounted yokes for the
mounting on the truss or any other suitable hanging point
plus suitable hooks/clamps approved by the BGV C1 for this
kind of installation.
NOTE!
The ¼ turn looks mounted at the sides of CPiX.4 are only used
for alignment – means the connection of multiple CPiX.4
together. These connection elements are NOT used for static
loads and cannot be used for mounting of CPiX.4!
Make sure to safe the fixture by a safety chain which is speci-
fied at least with a load limit of 12 times of the fixtures weight.
Only safety chain with approved connective can be used. At-
tach the safety chain to its designated opening and attach it to
the truss system or a similar and safe attachment point. Assure
to close the fasteners as specified.
19