Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The product complies with the requirements of European Union
directives.
In accordance with Directive 2012/19/EU, this product is subject to separate
collection. The product should not be disposed of with municipal waste as it
may pose a risk to the environment and human health. Return the used product
to the recycling centre for electrical and electronic equipment.
LIST OF PARTS (FIG. A)
1. Battery
2. Body with dust container and
handle
3. Tube
4. Electric turbo brush
5. Wall holder with charging option
DISPLAY (FIG. B)
1. Mode change
2. Tank full and/or filter clogged
indicator
3. Locked brush indicator
4. On/off switch
CHARGING
Note! Turn off the device before charging. The charging information will appear
on the display automatically.
1. The rechargeable battery can be removed and charged directly by connecting
it to the charger and power source (fig. 1).
2. The device can be charged on the wall mount (5, fig. A), connected to the
charger (fig. 2).
3. When fully charged, the device will automatically stop charging.
MOUNTING
Connect the components of the device as shown in the illustration (fig. 3).
Correct installation of the individual components will signal a click.
USE
1. Turn on the device by pressing the switch (4, fig. B).
2. Select the operation mode on the touch display (1, fig. B). The default mode
6. Crevice nozzle
7. Charger
8. Mopping pad
9. Replacement roll (x2)
10. 2-in-1 tip
5. The current mode of operation of
the device
6. Battery charge level
7. Suction power
EN
Werbung
