LOTTO OPTIMA Benutzerhandbuch Seite 5

EN
3. Hold left& right columns, use 6# hexagon wrench and screw M8*25 to lock the console frame on the
columns(Tighten all screws in above steps, and please notice not to clamp the cable by column).
M8*25
4. Use the knob in step one to lock the main base and columns(Rotate clockwise, please refer to the
arrow point direction).Uneven ground may cause trouble when rotate the knob, please lift the column
slightly to left side(as shown below).In order to fold the machine easily next time,please don't rotate the
knob too tight.
5