Herunterladen Diese Seite drucken

Optimum Time OE Serie Bedienungsanleitung Seite 7

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

4 The battervisin
batteryholder UNDERan insulating
label. Carefully peel this label off the
battery. This,will
ensure that the label can be re-usect 't MUST tE refitted
atter the new battery
5. There
one screw holding the battery retaining bar
Remove this. Remove the old battery Using
sornetnvng metal, connect the 2 contacts Ot
the reset section
visible on the circuit
board.
This is good procexiure to avoid static charges.
6, Fit a new battery tak'ng care not to hold the battery
withfingersacross both the—ve and -evecontacts.Replacethe batteryretainingbat.
7' REPLACE the insulating label This MUST be done.
8. Make Sure the Sealing gasket is properly located in tnegrooveon
grease helps
water-resistant seal
g. Replacethe caseback.makingsure toget the wordTOP inthe correctplace Thereare2tinypiastic
on the caseback at the TOP whtch have 10tit •n 2 small holesat the top Otthe case
10 Screw the 6 s"ews to no-ld'he caseback on. but do not over-tighten them as this will strip the thread,
'1, Check the display iS working and the beep sound iSworking if the casebaek iSnot in the right place,
the bep
work. More importantly the casebacK Will not fit propely
CASE BACK
CASE COVER
the casebac}c A small amounto'
CANM)T
Water-re-estant
ADJUSTING
THE ELASTIC
STRAP
There ts a rght way and a wrong way to
any Chance Otthe Strap coming undone.
t. Placethewatch on the wrist andpassthe elasticthroughthe claspfrom the bottom
to the top.
2. Pullthe elasticto the requiredtightnessandsecureby pressng theclaspfirmly closed.
3. Pushthe elasto loopoverthe sparelengthof elasücto keepthe looseend tidy.
—x
PERFORMING
A RESET
OF THE
WATCH
Sometimes e'ectromc products will need rebooting.
necessary, but whether 't is a computer, a phone or this watch, it is not an indication of a fault
tt may be that re.booting the watch will restart the processor and return the watch to normal functions
This is done by pressing and holding START'STOP AND CLEAR together tor 5 seconds. Every
*Jmentmcon on the
come on. When this nas happened the buttons can be released
and 'he watch is reset
the elastic strap. Please take note to avoid
COVERS
SPARE ELASTC
It is not always possibleto understand why this is
02

Werbung

loading