Optimum Time OE Serie Bedienungsanleitung Seite 5

4. It you have the same problern getting a
(with minute beeps), then it is possible to use COUNTDOWN from a period of less than 1 minute
WITHOUT the countdown alarms it you ask the starter to tel' you when 30 seconds remain and
have the timer programmed lor 30 seconds in countdown, the timer will beep at 3,2, 1,Oand then
count up. The watch will therefore not need to be started white you get your horse into the start
box. The minute beeps will be automatic
5. The watcn can be worn just 'ike any normal watch on the wnst. It also nas an elastic strap mat
means the watch can be uviyn over Clothing as well if the display is not convenient to 100k at when
it is worn like a normal watch. then the wnole timer case can be
better viewing angle.
6, ft you preter to navetne watch top ot the hand. then the timer should be removed from the Outer
clip and the elastic strap removed from the outer clip The outer clip can then be
usingthe 2 holes alreadyinthe clip The timercan men be pushedback tntpthe Gipat whatever
ange required
WARNING
We alwaysrecommendthat youtry the functionsfullyin practiseand do not attemptto usethe
watch tor the first time in a competition This warning is for your own safet'y%
COUNTUP OPTIONS
COUNTUP FROM ZERO on countup mode)
l. From CLOCK mode, press MODE to access the first option Of event timer, if the timer is stopped
and reset to O(YOO. the displaV will show the Word COUNTDOWN
STOP button first and then press the CLEAR button). Tne display will now snow 00:00. Then press
(t) E MOD n agai and t ne displaysnow C OUNTUP
into the start box, but preter COUNTUP fronn zero
countup.
inside the Outer dip to
the timer is running press the
.
2, Press START,STOP and the timer wdl count up from zero in minutes and seconds to a maximum
of 59mins 59secs
3. During the countup. the timer can be stoN*d
4. The countup from zero option nas a beep sound that sounds every minute
there is a Shilt beep and at second 00 there 's a longer beep on the tull minute
PROGRAMMED
1 To use the
a
timer is stopped and at zero, the display will show
Press the MIN button to program in the required minutesr and the SEC button to program in the
2.
required seconds The display will now show your programmed time This
to a glove
optimum time tor the cross country course This will Stay visible until StartlSt0p is pressed
3. press STARVSTOP button and the timer
display snow the word COUNTUP.
4. During the countup period. there
shon beep at seconds 57.58.59. and then a longer beep at second 00,
5. The timer can be stoppa' and restarted as many times as required during countdown
6. During the final 30 seconds Ofthe
sounds at second 30 From 15.14, 13.12 etc there are short beeps building up to a long beep
time (The end ot the optimum time).
7, At tull time, the timer will continue to count up The display will still show COUNTUP
NOTE The watch beeps in the final 30 seconds. 'f these beeps overlap With a minute beep, the
minute beep will NOT sound. The final 30 second warnings take prelerence
and restarted as many times as raiuired
COUNTUP
countup optim, use MODE to get to the COUNT UP mode.
and COUNTUP
up in minutes
be a sound tor each
period there are extra warning beeps. A lorv beep
secmds 57,58 & 59
the
probably be the
seconds from zero. The
minute gone. be a