Kemper FilterMaster XL Betriebsanleitung Seite 78

Pos. Description
2 Filter cartridge
9. As shown in the illustration, remove the filter cartridge (Pos. 2) including
the rotating nozzle (Pos. 4) and disposal bag (Pos. 6) from the product.
10. Pull the rotating nozzle (Pos. 4) out of the filter cartridge.
11. Close the disposal bag (Pos. 6) with the contaminated filter cartridge
(Pos. 2) airtight using the enclosed cable tie and dispose of it according
to the regulations.
12. Insert the rotating nozzle (Pos. 4) into the new filter cartridge (Pos. 2).
13. The further installation of the filter cartridge (Pos. 2) is carried out in
reverse order. When installing, make sure that the sealing surfaces of
the filter cartridge are airtight.
7.3.5 Checking the compressed air container with
compressed air safety valve
NOTE
The product has one or more compressed air containers with
compressed air safety valve.
Products with compressed air container and safety valve must be
serviced/checked according to current national regulations.
7.3.6 Checking the compressed air safety valve
The compressed air safety valve is located in the upper area of the product
under the maintenance cover.
1502867-00
Pos.
4
6
Tab. 27: Removing the filter cartridge
- 77 -
Description
Rotating nozzle
Disposal bag
EN