Kemper FilterMaster XL Betriebsanleitung Seite 72

WARNING
Health hazards caused by welding fume particles
Inhalation of welding fume particles, especially welding fume particles
from welding processes on alloyed steels, can damage your health as
they are 'respirable'. Skin contact with welding fume particles can cause
skin irritation in sensitive individuals.
To avoid contact with and inhalation of these dust particles, wear
disposable overalls, protective goggles, gloves and a suitable Class FFP2
respiratory protection filter mask in accordance with EN 149.
When emptying the dust collection container, please proceed as follows:
1. Switch off the product using the I/O switch.
2. Wait 2 minutes for the dust particles to settle inside the filter section.
Pos. Description
1 Clamp fasteners
2 Maintenance door
3. Provide a new dust collection container (Pos. 3) and a disposal bag.
4. Open the two clamp fasteners (Pos. 1) and open the maintenance door
(Pos. 2).
1502867-00
Fig. 18: Emptying the dust collection container
Tab. 23: Emptying the dust collection container
Pos. Description
3 Dust collection container
4 Filter cartridge
- 71 -
EN