Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Important!
Switching over the catch lever will shut off the
torque function.
Please
of the wrench
is 40
200
operate the wrench after it has released (click
sound)
Caution:
Never
use the wrench
and
nuts!
Never use the ratchet head with adapters for Other
square end sizes - use only the 1/2" square drive
wrench sockets! The square end Of the ratchet
head is geared to the torque to be set with the
mechanism of the torque wrench
Notes
• Only operate the torque wrench by grasping its
handle 2 (Fig. 1)!
• Do not use any extensions! This would not cor-
rectly signal the adjusted value
• Never adjust the torque value over or under the
limit
of the scale!
• Treat your torque wrench
for a measuring instrument!
• After use, the mechanics
destressed by adjusting to the lowest torque
value
Maintenance and inspection
TO relieve the pressure spring after use, adjust
to a low torque value!
• Never disassemble the torque wrench yourself!
For all repairs or malfunctions, please send the
wrench
to our central
printed on the last page of these instructions
Should calibration become necessary, please
retum
the device
to the manufacturer.
• Clean the device by dry methods - do not im-
merse
in benzine
or solvents!
note: The operating
Nm.
Never
continue
to loosen
corroded
bolts
with the same care as
of the torque must be
service
The
address
range
to
is
Werbung
