Devolo Magic 1 WiFi mini Handbuch Seite 94

41 Network configuration
Note that the custom password is not assigned
to the whole Powerline network automatically.
Instead, you must assign it separately to each of
your devolo Magic adapters.
Unpairing – Removing an adapter from a net-
work
1
To remove a devolo Magic adapter from your
devolo Magic network, click Leave Powerline
network.
2
Wait until the LED flashes red and then dis-
connect the devolo Magic adapter from the
mains supply.
devolo Magic 1 WiFi mini
Compatibility mode
Using as VDSL connection may negatively impact
the performance of the bandwidth connection by
crosstalk of the signal.
In order to mitigate any potential negative effects
the device provides the following options:
Automatic compatibility mode
If the option Automatic compatibility mode (re-
commended) is enabled, the device can automati-
cally adjust the output signal to avoid interference
as much as possible. This option is configured by
default.
Manual compatibility mode
If an interference has not been eliminated despite
activating the automatic setting, please disable it
and set the compatibility mode as well as the signal
transmission profile manually: