Connecting WiFi devices via WPS
b
If the device is still on factory defaults, tap the
Wi-Fi button in order to activate WPS.
b
If the Wi-Fi connection was switched off and
you would like to activate WPS, press the Wi-
Fi button twice; once to switch Wi-Fi on, and
again to activate WPS.
b
If the Wi-Fi connection is switched on and you
want to copy these settings to another
devolo Magic adapter, continue reading with
the Chapter 4.7.5 Config Sync.
WPS is one of the encryption standards de-
veloped by the Wi-Fi Alliance. The objective
of WPS is to make it easier to add devices to
an existing network. For more detailed in-
formation, refer to Chapter 4.4.7 WiFi Pro-
tected Setup (WPS).
Introduction 18
devolo Magic 1 WiFi mini