Track Repeat - Dual Cd 5070 Rc Bedienungsanleitung

Playing the disc
Press » Play 7 to start the disc
— The display will show the track number being played and the time
elapsed for this disc track.
— An arrow indicates the Play function.
1 5
(= 0:03
Pause
— Press the key Ill Pause 6 to set the player to pause.
The arrow in the display will go out and the time indicator will flash.
d :3
The pickup will remain stationary and playback will be muted
— Press key » Play 7 to resume playback from this position.
Stop
— Press key B Stop 4. Player will stop.
[a |
— If a selection of tracks has been stored, the player will return to the
irst track in the memory.
Player is now ready for further memory programming.
ur
Selecting a disc track
— Press the key Skip BI 12 each time you wish to move one track
forward.
— Press the key Skip 14 12 each time you wish to move back one
time track.
— Ifthe key Skip 12 are pressed from the Stop position, the player will
move to the desired track. The player will remain in the Stop position.
The track must then be started by pressing the key » Play 7
— The remote control keys 26 can be used to select individual tracks
directly. Playback of the track selected will start immediately.
— Press key 27 before selecting 2-digit track numbers using key 26.
Forward P» and reverse 44 search
— If the bb or #4 key 5 is pressed during playback, the pickup will
search up or down the disc as long as the key is pressed.
— Music excerpts can be heard for monitoring purposes.
— After releasing the key, playback will be resumed from the position in
which the pickup is located.
— Ifthe bb or da key is pressed in the pause position, the player will
remain in the pause position after either of these keys is released.
— If the forward or reverse search function is selected while a stored
music program is being played, the pickup will only move to the
beginning or end of a disc track and then resume playback.
Track repeat
— Press key Ly Repeat 10 once. Display will show One Repeat.
Bech
The track selected will be continually repeated.
Repeat the entire disc or a stored program
— Press key Cy Repeat 10 twice. Display will show Repeat all.
2- 431
— The entire disc or the stored program will be repeated.
Clearing the Repeat function
— After pressing the Ly Repeat 10 for a third time, the Repeat-
function will be cleared and playback will continue as normal.
Programming different music tracks in any sequence
It is possible to program up to 16 tracks. Player must be in Stop
position.
n
LI
— Press key Memory enter 14.
A "1* in the display indicates the first memory location and the
flashing symbol "Memor" indicates that the memory is ready for
programming.
È
e
a
t
'
— Press the keys Skip 12 or remote control keys 26 to select the
desired track (e.g. track 14).
ok 14)
pu a
— Press key Memory enter 14 again. Track 14 will now be stored and
memory location 2 is ready for programming.
MEMO
-g
— Program the next track in the same way.
— Press the key Memory enter 14 again to check which tracks have
been stored.
Starting the selected music program
— Press key » Play 7.
— The programmed disc tracks will be played in the same order as they
were entered,
— Using the keys Skip 12 you can jump to the next or previous
programmed track while a track is being played.
- Once all programmed tracks have been played, the player will return
to the stop position.
The player will go to the first track stored.
— The program can now be played again.
Altering the stored music program
The stored music program can be altered while the symbol "Memo" is
flashing which indicates that the player is ready for programming,
MEMO
"7 4
H