Connection To The Amplifier - Dual Cd 5070 Rc Bedienungsanleitung

ENGLISH
Power On/Off switch.
Disc tray, opens and closes by pressing the key Open/Close 3.
4 Open/Close
Press this key to open or close the disc tray.
E Stop key
<< Rev search in reverse direction.
>> F. F. search in forward direction.
Il Pause
Press this key for brief playback pause.
» Play starts playback
Phones jack for connecting medium to high-impedance stereo
headphones with 6.35 mm jack plug.
Volume control for headphone output
C, Repeat Press this key to start repeat
Press once: to repeat one track (display: One Repeat).
Press twice: to repeat the entire disc or selected program
(display: Repeat all).
Press this key again to clear the Repeat function.
11 Remain
The display will indicate the number of tracks still to be played and
the remaining playing time for all tracks.
12 Skip
I<4< Press this key to move back to the next lower track no.
PPI Press this key to move one track forward.
13 Memory clear press this key to clear memory.
14 Memory enter press this key to store desired disc tracks.
15 Display for playback Play 7.
16 Display for Pause 6.
17 Display for function Remain 11.
18 Remote sensor receiver for remote control.
19 Time indicator in minutes and seconds
20 Display for playback.
21 Track display.
22 One Repeat/Repeat all display for Repeat 10 function.
23 Memo — Display flashes after pressing key Memory enter 14 for
programming.
Display lights up continuously while program is being
played back,
24 Mains cable.
25 Line out R/L jacks for connecting an amplifier.
R = right channel.
L = left channel.
26 Keys 1-0 for selecting or storing desired track no.
First press key 27 to store 2-digit track numbers.
27 Press this key before selecting 2-digit track numbers using
keys 26.
Functions 3, 4, 5, 6, 7, 10, 11, 12, 13, 14, 26 and 27 can be activated
by remote control RC 75
o an Ons
oo DAY
Connection to the power supply mains
— Connect the player to a mains voltage of 220 V/50-60 Hz as
specified on the type plate.
— The player will remain live even after it has been switched off. For
complete isolation from the electric power mains, disconnect the
mains plug from the wall outlet.
Connection to the amplifier
— Using the RCA cable supplied, connect the Line out R jack to the
"right" jack at the amplifier CD input and the Line out L jack to the
"left" jack at the amplifier CD input.
— If the amplifier is not equipped with a CD input, another highlevel
input (such as tape, tuner, or aux) can be employed forthis purpose.
Switching the player On and Off
— Switch the player on by pressing the key Power 1
— The display will flash if no disc has been inserted. After several
seconds, the display will indicate Disc.
Loading the disc
— Press key 4 Open/Close 3.
— Disc tray will move out.
— Remove compact disc from its jacket without touching the surface
and insert it into the tray with the lable facing upwards.
— Press key 4 Open/Close 3 again.
— Disc tray will be retracted.
nn
nnnn
LILI uU UU
- The display will flash.
— After several seconds, the number of the disc tracks will appear on
the left of the display and their overall playing time on the right.
For example:
OH 55:40
— The display will then indicate the stop mode.
nm
LI
í
— The disc tray will also be retracted after pressing key > Play 7 or
one of the keys 26 on the remote control. Disc playback will now
begin.
— Ifthe disc tray is retracted after a disc has been loaded incorrectly or
without having loaded a disc, the display will indicate.
disc