dirna Bergstrom bycool COMPACT 2.0 Diagnose Bei Ausfällen Seite 17

COMPACT 2.0
• Connect or replace the power cable fuse.
• Check and correct any possible poor contacts, breakages or disconnections of the
battery power cable.
• Connect the communications cable (3-wire clamps located in the control panel,
control module or evaporator connection).
• Connect the control module wire clamp (in the box next to the compressor).
! (If the error persists, contact an Authorised Technical Service).
• Check and correct any possible poor contacts in terminals or cables of the
recirculation sensor.
• Connect or replace the recirculation sensor.
! (If the error persists, contact an Authorised Technical Service).
• Check and correct any possible poor contacts in connections or terminals of the
battery power cable.
• Charge or replace the battery.
! (If the error persists, contact an Authorised Technical Service).
Solution
17
Air conditioning for vehicles
ES
EN