A-rival YED06B Benutzerhandbuch Seite 22

Start-up
Make sure that the dehydrator is stable on a firm, level surface. Insert the mains plug
into a socket. The dehydrator is now ready for use.
1. Place clean and washed food on the trays. Do not overload the trays and do not
overlap the food. Now close the door of your dehydrator.
2. Switch the on/off switch on the back of the dehydrator to "|". The screen and the
buttons light up and a beep sounds at the start. The "START/STOP" indicator lights up
and "0000" is displayed on the screen.
3. Press the "START/STOP" button. The default time setting "10:00" and the
temperature setting "70℃" are displayed on the LED screen. The motor and fan start
first, 5 seconds later the heating element starts to work. The set time starts to count
down and the ":" symbol on the LED screen flashes.
4. Press the "TEMP/TIME" button, the LED screen displays the time value. Press the
"+" or "-" button as required to change the drying time between "00:30" and "24:00".
Press the "+" or "-" button once to increase or decrease the value by 30 minutes. If
you press and hold the "+" or "-" button, the time increases or decreases
automatically. 3 seconds after the drying time has been entered, the system
automatically switches to operating mode with the current time setting.
5. Press the "TEMP/TIME" button twice, the LED screen will display the temperature
value. Press the "+" or "-" button as required to change the drying temperature
between 35℃ and 75℃. If you press the "+" or "-" button once, the value increases or
decreases by 5°C each time you press the button. If you press and hold the "+" or "-"
button, the value is automatically increased or decreased. 3 seconds after completing
the temperature entry, the system automatically switches to operating mode with
the current temperature setting.
- 8 -