Goodyear GY 1802PW Benutzerhandbuch Seite 39

English
Owner´s manual
•
5. Do not use the appliance if a power cord or important parts of the appliance are damaged, it can only
be replaced by a qualified professional.
Storage
• When you have finished using the machine and want to store it, follow these steps:
1. Disconnect the water supply system from the water inlet hose and turn on the gun by letting it run for
a few seconds until the remaining water comes out, then quickly turn it off.
2. Unplug the power supply.
3. Disconnect the high pressure hose and garden hose (not supplied) and coil the hose.
4. Store in a frost-free place with a temperature above 0°.
• Precautions in case of storage and/or freezing:
If the unit is to be stored in a place where there is a risk of freezing, or if it will not be used for more than
three months, we recommend placing an antifreeze in the pump (normal antifreeze is recommended). In
any case, to avoid any risk, we suggest that you place the unit in a warm room for a few minutes before
use.
WARNING Long periods of disuse can cause lime deposits to form. Working through the hole in the
back, loosen the motor driver multiple times with a screwdriver. Then remove the screwdriver and
continue with the reset operations.
Environmental Protection
Do not put the packaging in the ordinary garbage for disposal, be sure to recycle the cardboard.
Take the machine to a clean point. Do not reuse components as spare parts as they may be damaged.
Make sure that parts such as batteries, oils, cables and the like do not come into contact with the
environment when their useful life ends. Dispose of appliances in the proper place.
9. TROUBLESHOOTING
Problem
The machine does
not turn on.
Unstable pressure
Possible reason
- The machine is not plugged in.
- Faulty plug.
- Fuse blown.
- Defective extension cable.
- Pump sucking air.
- Dirty, worn or clogged valves.
- Worn or broken pump seals.
Solution
- Plug the machine.
- Try another socket.
- Replace fuse, disconnect other machines.
- Try without the extension cable.
- Check the tightness of the hoses and
connections.
- Clean, replace or consult your local
distributor.
- Clean, replace or consult your local
distributor.
39