Goodyear GY 1802PW Benutzerhandbuch Seite 34

English
Owner´s manual
•
2. To disconnect the high pressure hose: Press the lock button (L) to release the hose and pull to remove
it from the water outlet of the machine (M) and from the water inlet to the gun (N).
ATTENTION: To easily detach the hose, pull the trigger to empty the water from the hose when the
operation is finished and the switch is in the "OFF/II" position.
M
7. OPERATION
Checks and instructions before start-up
• Check that each nut and bolt is sufficiently tightened and check if the power and water supply can meet
the demand of the machine.
• Checking the water filler: it is important to check the water filter before using the machine.
ATTENTION: During operation, the device must be placed on a firm and stable surface.
DANGER: Make sure that the high pressure hose is not coiled and knotted before operation, to avoid
obstructions and allow proper operation.
Do not connect the machine to dirty, rusty, muddy or corrosive water supplies (including window
cleaning fluids, plant food, fertilizers, etc.).
1. Place the machine in an upright position on a flat surface.
2. Check the intake filter and make sure it is not blinded.
3. Use neutral detergent to improve the washing.
4. Connect the spray nozzle to the lance and the lance to the gun handle. Screw both parts clockwise until
they are in the correct position.
5. Uncoil the high pressure hose to avoid kinking or pinching.
6. Connect the gun to the high pressure hose.
7. Connect the hose to the water outlet.
8. Connect the water supply hose to the water inlet of the machine.
9. Connect the other part of the hose to the general water supply.
34
L
L
N