Set-Up And Connection - Gourmetmaxx Rc009 Bedienungsanleitung

Digital Hot Air Frying Machine XL
Symbol Programme
Rotary grilling
(with automatic
rotating function)
Dehydrate
Reheating
L
The times and temperatures which are set for the programmes should be adjusted if
necessary to ensure that the food (in particular poultry) is fully cooked. Adjustments
can also be made during the cooking process.
Adjusting the Temperature and
Cooking Time
The set temperature and cooking time are
shown alternately on the display (17). The
preset values are 185°C and 15 minutes.
The cooking temperature (15) and the
cooking time
both without using a preset programme and
when a programme is chosen.
To do this, touch the respective symbol
(13 / 24 or 18 / 20).
To scroll through the values quickly, press
and hold down the respective symbol.
Rotating Function
Touch the symbol
rotating function on / off.
With the (rotary grilling) programme, the
rotating function is activated automatically.
Cooking Chamber Light
Touch the symbol
cooking chamber light on / off.
The cooking chamber light switches off
automatically after around 2 minutes.
Standby Mode
When you touch the
control panel (1) is activated / deactivated.
If the device is not operating and no button
is pressed for around 60 seconds, the device
switches to standby mode.
13208_Inlay_DE-EN-FR-NL_A5_V1.indb 21 13208_Inlay_DE-EN-FR-NL_A5_V1.indb 21
Ideal for ...
Bake Cakes, pastries
Roast chicken,
grilled or roast pork
Dried fruit,
vegetable chips, etc.
Reheating / defrosting food
(16) can be adjusted
(21) to switch the
(23) to switch the
symbol (22), the
Temperature Cooking time
160°C
190°C
30°C
115°C

SET-UP AND CONNECTION

Please Note!
■
Check the device and the connecting
cable for damage each time before put-
ting it into operation. The device should
only be used when it is undamaged and
in working order.
■
Never place the device on a soft surface.
/
The ventilation openings on the bottom
of the device must not be covered.
■
Ensure there is sufficient clear space on
all sides. Do not place the device below
kitchen wall units or similar cupboards.
The rising steam could cause damage
to them!
■
Only connect the device to a plug socket
that is properly installed and matches the
technical data of the device. The plug
socket must also be readily accessible
after connection so that the connection
to the mains can quickly be isolated.
■
Do not connect the device along with
other consumers (with a high wattage) to
a multiple socket in order to prevent over-
loading and a possible short circuit (fire).
■
Make sure that the connecting cable does
not present a trip hazard. It should not
hang down from the surface on which
the device is placed in order to prevent
the device from being pulled down.
EN
30 min
30 min
2 h
12 min
21
29.08.2023 17:33:35 29.08.2023 17:33:35