Hama RC700 Bedienungsanleitung Seite 6

6. UP key
In setting mode, press to increase the
setting value, and press it without releasing
to speed up the setting
7. SNOOZE/LlGHTkey
In normal mode, press to turn on the
backlight for 5 seconds
When the alarm is sounding, press to Stop
the current alarm and turn to snooze.
- In timer mode, press to start/stop the
countdown
8. ALARM ON/OFFslide switch
Slide to turn on/off the alarm
9. TIMER key
press to turn to timer mode.
When the timer is stopped, press and hold
for 2 seconds to return the countdown
to 1:00. Press to return to normal mode
10.RESE T key
In case of mal•function, press it by using a
metal wire to reset all the values.
11. RCCkey
press to manually receivlng RCsignal
During the RC reception, press to turn off
the reception
12. DEMO key
press and hold without releasing to test the
alarm sound.
13. ocrF key
Press to switch the temperature unit
between OC/OF_
14. Night-light ON/OFFslide switch
Slide to turn on/off night-light function
10
15.Batterycompartment
DISPLAY SYMBOLS
Liquid Crystal Clock
I AM/PM
2. Hour hand
3. Minute hand
4. Second
LCDDisplay
time
Normal mode
Month
Date
Day of the week
Temperature
Signal strength indicator
Daylight saving time
Alarm mode
1. Alarm time
2. Alarm icon
Timer mode
1 Tlmer mode
2. Hour
3 Minute
SIGNAL STRENGTH INDICATOR
The signal indicator displays signal in 4 levels
Wave segment flashing means time signals
are being received. The signal quality could be
classified into 4 types:
No signalquality Weaksignalquality
Acceptable Excellent signal
signal quality quality
If the RCclock receives signal successfully,
a sync-timesymbol"S" appearonthe LCD.
The unit has already received the time signal
Otherwise, the signal strength symbol wi I
disappear fromthe LCDdisplay
Note:
You may press "RCC" key to receive the time
signal manually. The receive mode will be
off automatically after 6-16 minutes. Receive
mode consumes more battery power that may
reduce battery ifetime.
DAYLIGHT SAVING TIME
The clock has been programmed to
automatically switch when daylight saving
time is in effect. Your clock will display "DST"
on the LCDduring the summer
TIME AND CALENDAR SETTING
If the clock does not receive the time signal
successfu ly, you can set the time manually.
As soon as the transmitter is received again,
the clock will automatically synchronize with
the received time
In normalmode,pressand hold"TIMESET"
key for 2 seconds until the Hour format digit
flashing
2 press "DOWN" / "UP" select 12/24
hour format.
3 Press "TIME SET" key again to step
the setting item to next item And press
"DOWN" / "UP" keyto adjust the value of
the flashing digit
4 Do the above operation in this sequence:
12/24 Hr format> Hour > Minute > Year >
M&D / D&M format > Month > Date > Time
difference > Language.
Note:
If your localtime is differentfromthe RC
received time, you can setthe desired
time zone or time difference. The available
time difference is from -23 hours to +23 hours
After setting the desired time difference, the
clock will show the time that RC received
plus/minus the time difference
time
11