GardePro X60PCF Bedienungsanleitung Seite 7

Send pictures to cell phone.

High quality pictures (48MP still photos), 1296P 20fps or

1080P 30fps H.264 video clips with audio .
Clear night vision. The X60P, X60PCF and X60P Max

models are equipped with 36pcs high performance infrared no
glow 940nm LEDs that function as a flash (invisible to eyes).
The X60PWF is equipped with 36pcs high-performance
white flash LEDs (visible to eyes) .
Easy to use/program with well-designed operation buttons and

built-in 2.4-inch color screen, easy to program, review pictures
and videos on the screen.
3 working modes - Motion detection, Time lapse and

Hybrid.
Fast trigger time approx. 0.1~0.5 seconds (pre-activated

technology with 3 PIR sensors designed), Fast recovery time of
less than 0.5 seconds, Long trigger distance up to 90ft.
Info strip on each capture: Date, Time, Temperature & Moon

phase.
Operation Hours, Loop Recording, Time Lapse, Password

Protected.
Built for any climate - IP66, Operation Temperature: -4~140°F

The X60P,

SD/SDHC/SDXC memory card, maximum capacity 512GB
(not included).
4. PARTS AND CONTROLS
The camera is equipped with an antenna, 36pcs IR or White
LEDs, Indicator, Light Sensor, Optical Lens, PIR Sensors,
Lock Holes in front view (Figure 1).
TIP: During use, the black PIR Lens may be dirty or have
scratches, however it does not affect the performance due to
the reliability design. If you must clean it, please try to blow it
X60PCF and X60PWF models support
3