Silvercrest SHU 3.1 B2 Bedienungsanleitung Seite 13

Fault rectifi cation
GB
This section contains important information on fault localisation and
rectifi cation. Observe the instructions in order to avoid risks and damage.
Malfunction causes and remedies
The following table will help with localising and remedying minor
malfunctions:
Defect
No picture displayed.
No sound.
NOTE
► If the aforementioned solutions do not resolve the problem,
please contact the Customer Service (see chapter Service).
10
Possible cause
Output device or source
devices not correctly
connected.
Output device or source
devices not switched
on.
Output device or source
devices not correctly
connected.
Check whether your
source device transmits
audio. No sound
transmitted when using
a DVI-HDMI adapter.
Rectifi cation
Check all cable
connections.
Ensure that all devices
are switched on.
Check all cable
connections.
Additional audio
connection cables are
required when connect-
ing DVI devices.
SHU 3.1 B2