Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Do not remove the hose while inflating. High air pressure may harm the body. Do not keep the
•
air pump working for more than 20 minutes.
Motor overheating may cause internal damage, please fully cool for 30 minutes after
•
continuous operation for more than 20 minutes.
If any components are damaged, please do not use this pump. Please contact a professional
•
for repair. This product shall not be exposed to rain or water.
To avoid danger, do not aim the pump at the face or body while it is in operation.
•
Please do not leave while inflating or deflating.
•
Please start the car when the product is in use to avoid unnecessary damage.
•
Inflation Operation
1. Put end of the hose into the air nozzle matching the air bag, turn clockwise and tighten it,
then insert the air charging valve of the air bag, and fix it by turning clockwise (Drawing 1).
2. Connect another end of the hose with the nut to air pump inflation port and tighten it
clockwise (Drawing 2).
3. Insert the car plug into a 12V DC socket.
4. Press the PSI/BAR Exchange Button to select the unit you want.
5. Press the Pressure Increase button "+" or the Pressure Decrease button "-" to set the
pressure you want, which ranges from 0 to 20PSI (1PSI=0.0689BAR=6.89KPA).
6. After completing the above steps, press the On/Off Switch button to start inflating.
7. During inflation, the pressure value can be increased or decreased by pressing the Pressure
Increase button "+" or the Pressure Decrease button "-"; the PSI/BAR Exchange Button can
EN
Drawings 1 & 2
Werbung
