VEGA VEGABAR 64 Betriebsanleitung Seite 66

10 Anhang
Highest calibrated value. For calibration of the high limit point you give the high measurement
-
value (pressure) to the sensor and transfer this point as HIGH to the transmitter. Unit derives from
'Sensor_range.unit'
CAL_POINT_LO
l
Lowest calibrated value. For calibration of the low limit point you give the low measurement value
-
(pressure) to the sensor and transfer this point as LOW to the transmitter. Unit derives from
'Sensor_range.unit'
CAL_MIN_SPAN
l
Minimum calibration span value allowed. Necessary to ensure that when calibration is done, the
-
two calibrated points (high and low) are not too close together. Unit derives from 'Sensor_range.
unit'
SCALE_IN
l
Min/max-adjustment: Upper and lower calibrated points of the sensor. Unit derives from
-
'Sensor_range.unit'
trimmed_value
l
Sensor value after the trim processing. Unit derives from 'Sensor_range.unit'
-
sensor_sn
l
Sensor serial number
-
temperature
l
Process temperature. Selected as input to AIFB by setting 'Channel' = 4. Unit derives from
-
'Temperature.unit'
temperature_unit
l
Unit code of 'Temperature', 'Max/Min_peak_temperature_value'
-
°C, °F, K, °R
-
max_peak_temperature_value
l
Holds the maximum process temperature. Write access resets to current value. Unit derives
-
from 'Temperature.unit'
Write access resets to current value
-
min_peak_temperature_value
l
Holds the minimum process temperature. Write access resets to current value. Unit derives
-
from 'Temperature.unit'
Write access resets to current value
-
66
VEGABAR 64 • Foundation Fieldbus