Systemprerequisites; Device Id; Saving Edited Sounds; Recording Programmer Data - Access Microwave Programmer Bedienungsanleitung

14
SYSTEM PREREQUISITES
The operatingsystemversion of the MICROWAVE must be I .20 or higher. Outdated
operatingsystemversionsareunableto processrealtime SysExdata.To ensureyou areable
to exploit all the options the MICROWAVE and the accessMICROWAVE PROGRAMMER
haveto offer, you definitely shouldload the latestupdate(currentlyV2.0).
DEVICE 11)
The MICROWAVE PROGRAMMER featuresa fixed DeviceID settingof 0. Consequently,
the Device ID of the connected MICROWAVE must also be set to 0, otherwise the
Programmerwill be ignoredby the MICROWAVE. If you areusing severalMICROWAVES
in conjunctionwith the Programmer, s etthosedevicesyou do not want to edit to anID No.
other than 0.
SAVING EDITED SOUNDS
TheMICROWAVE PROGRAMMERis not equipped with a memoryof its own. Save
soundsyou haveeditedin the usualmanner,in otherwords,directly at the MICROWAVE
via the Shift/Store function.
RECORDING PROGRAMMER
The MICROWAVE PROGRAMMER convertsthe settingsyou havedialedin at the front
panelto systemexclusivedata;in otherwords,specificdatafor the diversedevices.Most
sequencers a reableto process andrecordtheseSysExdatasoyou canpermanentlyintegrate
edited sequencesin an arrangement.
You shouldreservea track specificallyfor this purposeand,additionally,ensurethe
sequencerdoesnot filter out the SysEx data.
Softwaresequencers o ftenfeaturespecial M IDI filters for recordingpurposes.
DATA
MICROWAVE PROGRAMMER OWNERS MANUAL