Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5.4 Performing settings
1
To o o pen c c onfiguration m m ode:
The instrument is switched on and is in measurement
view. Hold, Max or Min are not activated.
Press and hold
changes.
- The instrument is now in configuration mode.
You can change to the next function with
You can leave configuration mode at any time. To do
so, press and hold
instrument has changed to measurement view. Any
changes that have already been made in configuration
mode will be saved.
2
To s s et t t he a a rea:
Configuration mode is opened, m
Set the cross-sectional area with
confirm with
3
To s s et t t he l l attice f f actor:
If parts of the cross-sectional area are covered (e.g. by
lattice members), this can be corrected via the lattice
factor. The lattice factor indicates the proportion of free
space on the cross-sectional area.
Example: If 20% of the area is covered, the lattice factor
must be set to 0.8 (80% free space)
Configuration mode is opened, fact is lit.
Set the lattice factor with
.
(for approx. 2s) until the display
(for approx. 2s) until the
.
/
5. Operation 25
.
2
2
or in
is flashing.
/
and
and confirm with
Werbung
